Areas of use
Painted surfaces and external plastic components on cars, commercial vehicles, motorcycles, etc.
Recommendation For Us
- Pre-clean/wash the vehicle thoroughly with alkaline (e.g. with Green Star, no sealing shampoos) before polishing and sealing. Pre-treat coarse soiling such as tree resin, rust film, tar, etc. with cleaning clay, tar washing, etc Paint preparation for strongly to medium weathered paints. Depending on the condition, machine the paint with sanding polish Heavy Cut (H9.01) or Fine Cut (F6.01). Remove residues completely with a professional microfiber cloth. Lightly weathered paints (hologram removal) for high-gloss Micro Cut (M3.02) can be machined with an eccentric with forced rotation (e.g. Makita PO5000C) and Micro Cut Pad (see product information). Micro Cut M3.02) Remove residues completely with a professional microfiber cloth. Wipe all surfaces with a clean professional microfiber cloth soaked with silicone & wax remover with little pressure and wipe with another new professional microfiber cloth with a second hand immediately before drying. This is the only way to completely remove surfactants, drying aids, oils contained in polishes, etc. and avoid crosslinking problems with the hand wax. Attention: Silicone & Wax Remover should be diluted 1:4 with water in order to avoid possible matting. Polish last streaks with another clean, professional microfiber cloth without pressure. The varnish should now have a scratch- and hologram-free surface under sunlight or a varnish control sodium vapor lamp. After this step, the varnish must not be touched with the palms/fingers (danger of cross-linking disturbances; use gloves). The surface is now perfectly prepared for the hand wax. To apply, press the supplied sponge lightly into the can and spread the wax evenly over the surface. Allow the wax to flash off and polish with a microfiber cloth. In order to have a high-gloss wax surface for a long time and not to remove it too quickly during cleaning, the vehicle should be carefully washed by hand. Because harsh and aggressive cleaning tools remove waxes faster and scratch the surface.
Notice
- Before using, check suitability and compatibility.
